Appearance
Y331-0011/0022/0044/0066/0088 Analog Input/Output Modules Specification
Contents
- Overview
- Ordering Information
- Key Features
- Technical Specifications
- Interfaces and Pinout
- Mechanical and Environmental
1. Overview
The Y331 analog input/output modules belong to the YenGear Serial I/O Modules family. Each module provides 1, 2, 4, 6, or 8 analog inputs and the same number of analog outputs for acquisition and control.
Input and output channels are separate. The RS485 and CAN options provide communication isolation; channel-to-channel isolation is not specified for these models.
2. Ordering Information
2.1 Model Configuration
The four positions after Y331- follow DI / DO / AI / AO. Retain all four positions. Combined models use Y331-00NN, where N is the count for each function, not the total I/O count.
| Model | DI | DO | AI | AO |
|---|---|---|---|---|
| Y331-0011 | 0 | 0 | 1 | 1 |
| Y331-0022 | 0 | 0 | 2 | 2 |
| Y331-0044 | 0 | 0 | 4 | 4 |
| Y331-0066 | 0 | 0 | 6 | 6 |
| Y331-0088 | 0 | 0 | 8 | 8 |
2.2 Interface Options
| Interface | Configuration |
|---|---|
| Isolated RS485 | Default; Modbus RTU |
| RS232 | Optional |
| Isolated CAN | Optional |
Specify the interface with the model when ordering.
2.3 Input and Output Range Options
| Function | Voltage ranges | Current ranges |
|---|---|---|
| Analog input | 0-5 V, 0-10 V | 0-20 mA, 4-20 mA |
| Analog output | 0-5 V, 0-10 V | 0-20 mA, 4-20 mA |
State the input and output ranges when ordering. Availability of different AI/AO ranges or mixed channel ranges is unverified for these models.
3. Key Features
- Differential analog inputs
- Read analog inputs and write output setpoints
- Power and communication indicators
- Parameter reset button and hardware/software watchdogs
4. Technical Specifications
4.1 Power and Protection
| Parameter | Specification |
|---|---|
| Supply voltage | 6-36 VDC |
| Protection | Overcurrent, overvoltage, reverse polarity, and surge protection |
4.2 Analog Input and Output
| Parameter | Specification |
|---|---|
| Channel count | 1, 2, 4, 6, or 8 AI + the same number of AO |
| Input voltage ranges | 0-5 V, 0-10 V |
| Input current ranges | 0-20 mA, 4-20 mA |
| Input method / ADC resolution | Differential / 12 bits |
| ADC sampling / data update rate | 200 kHz / 30 Hz per input channel |
| Input accuracy | ±0.1%; full-scale/reading basis and test conditions not specified |
| Voltage input impedance | Not established for this hardware |
| Milliamp input resistance | 249 Ω |
| Output voltage ranges | 0-5 V, 0-10 V |
| Output current ranges | 0-20 mA, 4-20 mA |
| Output setpoint increment | 1 mV or 1 µA in register encoding |
| Output accuracy | Not established for this hardware |
| Output load limits | Not specified for voltage or current versions |
| Output setpoint retention | Not retained after power loss |
The setpoint increment describes register encoding, not measured output resolution. Model-specific electrical data is needed for voltage input impedance, output accuracy, physical resolution, load limits, and startup output.
4.3 Communication
| Parameter | Y331 (isolated RS485) |
|---|---|
| Interface | Isolated RS485 |
| Communication isolation voltage | 3000 V; test conditions not specified |
| Protocol | Modbus RTU |
| Default address | 1 |
| Default speed | 9600 bps |
| Serial format | 8 data bits, 1 stop bit, no parity |
| Address setting | 1-255 |
| Baud-rate options | 4800, 9600, 14400, 19200, 38400, 56000, 57600, 115200 bps |
RS485 communication settings are retained after power loss. See the technical manual for configuration procedures.
CAN bit rate, node addressing, and message format are not specified. RS232 serial settings and isolation are also unspecified; request the protocol information for the selected interface.
5. Interfaces and Pinout
5.1 Terminal Overview
| Group | Terminals / Function |
|---|---|
| Power | + / -: supply positive / negative, 6-36 VDC |
| Analog input | AI+ / AI-: input positive / negative, per channel |
| Analog output | AO+ / AO-: output positive / negative, per channel |
| RS485 | A / B: bus positive / negative |
| RS232 / CAN | Pin assignments not specified; use the interface-specific terminal drawing |
| Parameter reset | Use the hardware-specific reset procedure; button timing not specified |
5.2 Wiring Guidelines
- Identify channels using the labels on the selected module.
- Connect voltage inputs across the signal source and current inputs in series with the measured circuit.
- Wire AO to a receiver that accepts the ordered output range. Obtain the output load limits before selecting the receiver.
See the Technical Manual for input jumper selection, RS485 wiring, and commissioning.
6. Mechanical and Environmental
| Item | Specification |
|---|---|
| Mounting | Screw mounting |
| Operating temperature | -40 to +85 °C |
| Humidity | 0-95% RH, non-condensing |
| Weight | Not specified |
Enclosure Sizes
| Models | Dimensions (mm) |
|---|---|
| Y331-0011 | 102 × 50 × 31.4 |
| Y331-0022 | 90 × 90 × 40 |
| Y331-0044 / Y331-0066 | 115 × 90 × 40 |
| Y331-0088 | 145 × 90 × 40 |
Use the drawing for the ordered hardware version when planning mounting clearances.
- Manufacturer: Hunan YenGear Tech Co., Ltd.
- Email: [email protected]
- Website: www.yengear.com